Premium Reef 50gpd 3 Stage RO Unit
	Rating: 5.00 Quantity in Basket: none Code: PR-RO50 Price:$99.95
	Quantity:
Premium Reef Supply units are assembled right here in Indiana. We are able to watch quality control over them very closely. We have been in search of a lower priced RO unit for quite some time but also still wanted to keep quality high. For the price, it’s hard to beat the quality of construction and higher grade parts with these units. We feel Premium Reef is the best “no frills” less dollar bills RO you can find and still keep that quality of materials. The RO membrane housing and canisters are industry standard, so changing the membrane or filters is a snap. We can even have one built with SpectraPure or Kent membranes for additional cost. Features Clear O’ring Pre-filter Canisters for extra water protection John Guest Speed Fittings through out unit for easy tubing changes. Standard 2.5" x 10" 1 Micron Sediment Filter Standard 2.5" x 10" 5 Micron Carbon Filter Filmtec TFC Membrane provides proven high performance for consistent reliable water purification 5 Feet of feed, good, waste water line tubing 1/4" John Guest brand. Garden Hose Fitting w/speed fit. Premium Reef Instructions Your new Premium Reef Supply system comes completely installed. The diagraph above is a view from the back of the unit. 1st Stage. It’s a 1 micron sediment filter. It’s industry standard 2.5 x 10” size. You can use .5, 1, 5, 10 or 20 micron in the future if you prefer. We recommend you change your micron filter every 4-6 months. 2nd Stage. It’s a 5 micron carbon block filter. It’s industry standard 2.5 x 10” size. You can use .5, 5 or 10 micron carbon block, or granulated. We recommend you change your carbon block filter every 6 months. 3rd Stage. This is your RO Membrane. Inside is an industry standard Tec TFC Membrane. Under normal circumstances it should last 2-5 years depending on water quality and use. You can use other brand membranes in the future and other GPD rates as well. If you change from 50gpd, you just change the flow restrictor located on the yellow line connection. Color Coded lines. You have 3 colors of water lines. Black is your input feed line. You connect your black feed line to a water source. Example would be a laundry sink hookup, or taping into your water line in your house. The yellow line is called your waste water or rejection line. Any water that does not pass purified through the membrane gets rejected down the yellow line. You just run this line down a drain. The BLUE line is your product water or good water line. This is purified RO water. You run this into a storage tank, bucket, etc whatever you prefer. If you want to setup a top off system, with a float you’ll need a top off kit and that includes a solenoid to install on your RO to shut off the waste line. Starting up your unit first time, we recommend running around 5 gallons of product water and discarding. This will ensure the membrane was flushed out of any possible dust or contaminants from the factory. Then you are ready to go. We recommend feeding your water off either a cold line, or warm water up to 77 degrees will yield the best results, but be sure not to go over 77 degrees or you can damage your membrane. We recommend a minimum of 40psi water pressure, which most households should have. If you are low on pressure, you can add a booster pump to increase pressure. Enjoy your new unit and thank you for purchasing a Premium Reef Supply unit.

Customer Reviews	Add Your Review
5 SWEET!!	08/25/2005 - by Owen Szulgit from Chippewa Falls, WI US
This thing is sweet and it was really cheap. But it doesn't get 50 gpd.