The Direct Connect 8 modules features 8 solid-state controlled outlets each
capable of switching 120V at 6 Amps. The DC8 enables a very reliable hardwired
connection between the AquaController and all controlled devices - X10
interference problems caused by noisy electronic ballasts (i.e. Blueline) are
eliminated. NOTE: This module is suitable for use on ICECAP™ ballasts.
| |
8 120V Outlets (Max 6 Amps, total current
must be less than 15 Amps). |
| |
Compact custom aluminum enclosure (8.8" x
3.35" x 1.6"). |
| |
High reliability direct wired connection to
the AquaController (does not use X10). |
| |
Can be used with electronic ballasts which
cause X10 interference. |
| |
Completely Silent Operation uses solid state
relays. |
| |
"Soft-Start" for reduced pump wear. |
| |
Up to 4 DC8s can be daisy chained together for
up to 32 switched outlets. |
| |
Control Interface (IM513) can be last device
in chain (Simultaneous X10 and hardwired control) |
| |
Fuse Protected |
| |
4 Mounting Holes for easy installation |
| |
Recommended for use with ICECAP™ ballasts |
