Turbo chalk reactor control III for all Turbo chalk reactors. Solenoid and check valve are built in the box

Advantages
The new Turbo Chalk Reactor Control III with the built in solenoid and check valve is mounted outside of the Turbo Chalk Reactor of AquaCare. With the long cables of sensor (2 m) and mains plug (1,5 m) you have a long radius of working.

Because the important components solenoid and check valve are built in. It is nearly impossible to mix up the flow direction of the CO2. Makes less work for the aquarist. An overdosing of CO2 is not possible independent of the chosen CO2 flow (bubbles per seconds). The accuracy is better compared to the control I.

For this lime reactor control you do not need a pH probe, that should be calibrated regularly.

Function
With this control an automatic controlling of CO2 for the Turbo Chalk Reactor is possible. If the internal pH value is controlled correctly, the water has the maximum power for dissolving the Turbo granules. This control is suitable for all Turbo Chalk Reactors.

With the start and if too less CO2 is in the reactor the solenoid opens and is dosing CO2 into the reactor. If the right volume of the gas is in the reactor the control shuts off the CO2 flow.

Technical Data of Turbo Chalk Reactor Control
dimensions L x W x D of box 130 x 90 x 45 mm
delivered parts control box with built in solenoid and check valve, 6 mm connectors for CO2 pressure tube,
CO2 sensor with 2 m cable, instruction manual, mounting material
function if too CO2 is in the reactor the control shut on the solenoid with 3 seconds delay;
if enough CO2 is in the reactor the solenoid shuts off at once
time delay of CO2 dosing 3 seconds
electrical connection 230 volts, 50/60 Hz, 7 watts
material of box ABS
weight 800 g